Aspire K1 Stealth Kit
If you are looking for a tried and tested, truly stealthy device that fits discretely in the palm of your hand, Aspire's new K1 Stealth is just what you’re looking for.
Introducing the Aspire K1 Stealth Kit, a newly designed mod with a built-in 1000mAh battery and the tried and tested K1 plus tank, combined to give users a new experience in stealth vaping.
Aspire's K1 Stealth kit comes in two discrete, understated colors, Silver and Black, with well-placed cut-outs enabling you to see, at a glance, the e-liquid level in the K1 plus tank.
Kit Dimensions
Aspire’s K1 Stealth Kit is truly palm sized being only 39mm wide and 21mm thick. The K1 Stealth kit also comes equipped with three wattage settings allowing the user to choose and output of 8, 10, or 12 watts depending on the preference for a warmer or cooler vape.
Two Versions
The K1 Plus tank comes in two versions, a ‘standard’ 2.4 ml tank and a TPD version with a capacity of 1.9ml for TPD regions. The K1 tank also has replaceable 1.8ohm coils and is also compatible with aspire original BVC coils and Spryte coils.
Both have adjustable airflow and the TPD version also has ‘child resistant’ features top and bottom.
K1 Plus Filling
Filling the K1 plus tank is easy, just three steps. First, unscrew to remove the drip tip from the tank, then add your preferred e-liquid by pushing the tip of your filling bottle through the filling hole. Finally, put the drip tip back on top of the tank and screw to secure it. Three simple steps and it’s done.
K1 Plus Filling (TPD Version)
For the child resistant TPD version, it’s almost the same, to remove the drip tip, push down and turn to unscrew and remove the drip tip. When adding e-liquid, by push the tip of your filling bottle through the self-sealing filling hole. Then just reassemble remembering to push down and turn when replacing the drip tip.
Coil Installation (Standard Version)
Simply unscrew the base hardware and remove from the tank it. Unscrew the coil and replace. Re-inset the base hardware to the tank and screw in to secure.
Coil Installation (TPD Version)
The TPD version is child resistant and the coil replacement steps are a little different.
Invert the tank, push down the base hardware and unscrew to disengage it, then push and unscrew to remove the used coil then push and screw to install a new one. The base hardware is re-installed by pushing down and screwing in to relocate the base hardware.
Note: The pressing and twisting operations in each step are performed simultaneously
Tank installation
Simply screw the metal connecting ring to the bottom of the K1 Plus tank, then insert the tank into the mod, the tank will be drawn into the mod and be held in place magnetically, it couldn’t be easier.
Note: do not drop the connecting ring into the mod by itself. Ensure that it is securely screwed into place on the tank.
In order to avoid dry burning and damage to the coil, please fill the tank before installation.
Safety Features
The Aspire K1 Stealth kit comes with all the safety features that Aspire is famous for.
Set the output wattage
Press the bottom mode button twice in rapid succession to adjust the output wattage.The bottom wattage lights will turn on to indicate the level of the output wattage:
When the USB cable is attached, the indicator light will flash red 3 times. While charging the indicator light will indicate the device’s current charge status: 3.5 volts or less= red light; 3.5 to
3.8 volts= blue light; 3.8 volts and above =green light. When the device is fully charged, the indicator light will flash green 20 times then remain off. When unplug the USB cable, the indicator light will flash green 3 times.
Kits Contents
Standard Version:
1* K1 Stealth mod / 1* K1 Plus tank / 2* Nichrome coils (1*1.6Ω & 1*1.8Ω preinstalled) / 1* Metal connecting ring / 1* USB cable / 1* User manual / 1* Warranty card
TPD Version:1* K1 Stealth mod / 1* K1 Plus tank / 2* Nichrome coils (1*1.6Ω & 1*1.8Ω preinstalled) / 1* Metal connecting ring / 1* USB cable / 1* User manual / 1* Warranty card
