Aspire Typhon Revvo Kit
Introducing a new addition to our kit range, the Aspire Typhon 100 Revvo Kit A brand new kit, combining the imaginative, innovative Revvo tank, and the Typhon 100 mod. The Revvo tank with an all new coil design, the ARC, Aspire Radial Coil, where the coil itself sits horizontally in the tank similar to a 'stove-top' for great flavor and great vapor production. It's a 24mm diameter tank with a 3.6ml standard and a 2ml TPD version. The tank has a fully adjustable top airflow by way of 3 airflow slots, and super easy top fill through a spring loaded filling tube. The mod itself is both compact and ergonomic, with a curvy design and is powered by a 5000mAh internal battery, with a maximum output wattage of 100W. The Typhon 100 also supports VW/VV/Bypass/CPS/TCR.
The kit comes with three splashed colors: Blue, Green and Red.
Kit Dimensions and Specifications
The tank comes in a TPD compliant 2ml version and a standard 3.6ml version.
Components view
Easy maintenance Revvo tank
The Revvo tank parts can be fully disassembled for easy maintenance and clean.
No one has yet produced such an innovative replaceable coil for an RTA tank until now, except of course, Aspire. The fantastic all new coil design, the ARC, 'Aspire Radial Coil' which sits horizontally in the tank similar to a 'stove-top' design. Of course the real trick in the design is the increased surface area of the coil for great flavor and great vapor production, made using Kanthal material and rated at 0.10-0.16ohm.
The tank has adjustable top airflow with three large air inlets to enable full enjoyment of your favorite e-liquids.
Revvo Tank Filling
Filling your new Revvo through the centre of the tank, in which sits a spring loaded filling tube. The spring of the tube is soft enough to allow even slight pressure from almost any type of bottle/glass dropper to open it, but strong enough to create a leak proof seal when released after filling.
Typhon 100 Firing Modes
Turning the mod on and off is the usual 5 clicks of the fire button and switching between or selecting firing modes is an easy task with the various combinations of button presses. Whatever your vaping style or preference, the Typhon 100 can cater, whether it be variable wattage, variable voltage, bypass (similar to using a mechanical mod) temperature control or setting up a power curve. The Typhon 100 can do it all!
Charging
Charging couldn't be easier, just attach the supplied micro usb cable to the charging port and attach to a power supply. When you connect your Typhon 100 mod to the charger the screen will display a flashing battery icon as well as battery voltage level, charge current and charge time. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off. The maximum charging rate is 2 amps. Please note: Do not leave your mod unattended while charging and always use the usb cable provided to prevent damage to the mod.
Kit Contents:
Kit Contents:
1* Typhon 100 mod / 1* Revvo tank / 2* Coils (0.10-0.16ohm) / 1* Glass tube / 10* O-rings / 1* USB cable / 1* Warning card / 1* User manual / 1* Warranty card / 1* Protective silicone cap
