You are here: Home
aspire nautilusaspire nautilusaspire nautilusaspire nautilusaspire nautilus

Aspire Puxos Kit

Aspire now brings you the ultimate in mod adaptability and flexibility. Introducing the new Puxos Kit. It allows for use with three different battery types, an 18650, a 20700 or a 21700. it also comes with the all new Aspire Cleito Pro tank, which is just as flexible as it accepts coils from Cleito and Cleito Exo tanks. The Puxos can be used in various modes, allowing you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).
Aspire Puxos Kit
Not only is it flexible in terms of battery type and coils, now Aspire has gone even further by providing a full 14 different color and style options!

Kit Dimensions

Aspire Puxos Kit
A very portable kit that is comfortable to hold and fits equally well in purse or pocket.
Aspire Puxos Kit
Choose from 14 different styles and finishes, from plain colors to contemporary designs, ‘snap on’ magnetic side panels/ battery covers, are fully interchangeable and available to purchase separately to truly customize your mod depending on your own style or even mood.Choose form plain colors black, silver, white, blue, gold, red and pink. You could even mix and match your side panels.

Components view

Aspire Puxos Kit

Cleito Pro Exploded View

Aspire Puxos Kit
The Cleito Pro tank can be fully disassembled for cleaning and maintenance
Aspire Puxos Kit

Cleito Pro Filling

Aspire Puxos Kit
Now even easier to fill thanks to a top side-fill slot – no need to unscrew. Slide up the top ring to reveal the filling slot and fill with your preferred e-liquid.

Cleito Pro coil Installation

Aspire Puxos Kit
Fitting or replacing the coils in the Cleito Pro couldn’t be simpler, unscrew the Delrin drip tip, remove the top section, then unscrew and remove the coil (if fitted) and screw in the new coil. Remember to let the coil stand for a few minutes to thoroughly saturate the wicking material before vaping.

Battery Installation

Aspire Puxos Kit
Remove the magnetic side panel and insert the battery of your choice, an 18650 (use the supplied adapter), a 20700 or a 21700. Insert the battery negative post down as seen in the diagram and replace the side pane

Dual output modes

Aspire Puxos Kit
* when using an 18650 battery, it must be mounted in the supplied adapter.
* When using a 20700 battery, select the same output as 21700 battery.

Puxos Mod Safety Features

Aspire Puxos Kit
The Puxos kit comes with all the safety features that Aspire is famous for.
Aspire Puxos Kit
Charging couldn't be easier, just attach the supplied micro usb cable to the charging port and attach to a power supply. When you connect your Puxos mod to the charger the screen will display a growing battery icon. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off. The maximum charging rate is 2 amps.

Kit Contents

Standard version:
1* Puxos mod / 1* Cleito Pro tank(3ml) / 2* Coils (0.5Ω) / 1* Glass tube(4.2ml) / 6* O-rings / 1* USB Cable / 1* 21700 battery / 1* 18650 battery adapter preinstalled / 1* Warning card / 1* User manual / 1* Warranty card

TPD version:
1* Puxos mod / 1* Cleito Pro tank(2ml) / 2* Coils (0.5Ω) / 6* O-rings / 1* USB Cable / 1* 21700 battery / 1* 18650 battery adapter preinstalled / 1* Warning card / 1* User manual 1* Warranty card