You are here: Home > Products
aspire nautilusaspire nautilusaspire nautilusaspire nautilusaspire nautilusaspire nautilus

Aspire Dynamo Kit

Aspire Dynamo Kit
Aspire now brings you yet another kit with awesome flexibility and lots of power. Introducing the new Aspire 220 watt Dynamo kit. It allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can also be used in various modes, allowing you to easily select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). It comes in five super colors Dark Grey, Red with Black, Rainbow, Purple, and Camo with Black, all have the new Nepho tank in complimentary colors.

Kit Dimensions

Aspire Dynamo Kit
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 220 watts regardless of which type of battery is used, 18650, 20700 or 21700

Components view

Aspire Dynamo Kit

Nepho Coils

Aspire Dynamo Kit
The new press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspires all new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.

Nepho coil Installation

Aspire Dynamo Kit
Coil installation couldn’t be easier, simply unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank. The new Nepho coils are now press fit so are much less messy to handle when replacing.
Aspire Dynamo Kit
Aspire Dynamo Kit

Battery Installation

Aspire Dynamo Kit
Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.

Mod screen, settings, and modes

Aspire Dynamo Kit

Watch UI

Aspire Dynamo Kit
Press fire button to enter. When you are in “Time Set”press fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod, we’ve created 11 different types of Watch UI to expand your choices.

Battery Installation

Aspire Dynamo Kit
The Dynamo kit comes with all the safety features that Aspire is famous for.

Charging

Aspire Dynamo Kit
Charging the mod via Micro-USB charging port, the charging current can reach up to 2A . When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging the screen will shut off.
The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging, please unplug the charging cable before changing the batteries.

Package Contains

1* Dynamo mod / 1* Nepho Tank / 1* Glass tube / 8* O-rings / 2* Coils (1*0.5Ω & 1*0.15Ω Mesh Coil) / 1* USB Cable / 1* Warning card / 1* User manual / 1* Warranty card / 1* Dual 18650 battery adapter