You are here: Home > News > Aspire Nautilus 2S Tank
aspire nautilusaspire nautilusaspire nautilusaspire nautilusaspire nautilusaspire nautilus

Aspire Nautilus 2S Tank

Aspire brings you the all new, just as curvy, Nautilus 2S. The new Nautilus 2S tank that comes in 2.6ml and a 2ml version for TPD. The latest in the Nautilus 2 tank series, a sleek, curvy design equipped with a 0.4ohm BVC coil for direct to lung vaping and a 1.8ohm BVC coil for mouth to lung vaping. Top-fill child resistant design with a silicone self seal keeps things clean, and as the coils are interchangeable with other Nautilus coils, it allows you to personalize your draw/vapor preference.
Aspire Nautilus 2S Tank
The new Nautilus 2S tank comes in five stylish finishes, Stainless steel, space gray, blue, black and rainbow.

Tank Dimensions and Specifications

Aspire Nautilus 2S Tank

Nautilus 2S Exploded View

Aspire Nautilus 2S Tank
Aspire Nautilus 2S Tank
Aspire Nautilus 2S Tank
Aspire Nautilus 2S Tank

Nautilus 2S Filling

Aspire Nautilus 2S Tank
Refilling the child resistant Nautilus 2S tank is simplicity itself and mess free. Unscrew the top cap anti-clockwise a few turns, Place your thumb on the top cap above the indicator spot and push away from you, this will reveal the filling slot. Push your eliquid bottle tip down through the filling slot (for TPD version: through the larger of the holes in the self sealing silicon filling slot). Once filled, slide the top cap back into place and screw the top cap back down.
The unscrew and push action plus the perfect amount of strength resistance to open ensures that this tank will be child resistant and leak free.

Nautilus 2S coil Installation

Aspire Nautilus 2S Tank
Coil installation is as easy as unscrewing the base hardware from the main body of the tank, removing the glass tube, then screwing in the new coil. Then replace the glass and top hardware, and screw back onto the base hardware. The new Aspire Nautilus 2S tank is compatible with Nautilus BVC coils.
Note: when installing a new coil, let the tanks stand for 5 minutes after filling to allow the cotton to fully saturate with eliquid to prevent damage to the coil and /or burning the wicking material.

Package Contains

Standard Version:

1* Nautilus 2S tank (Pre-installed a 1.8ohm coil) / 1*Extra drip tip / 1* Extra glass tube / 1* 0.4ohm BVC coil / 9* O rings / 1* warranty card / 1* user manual


TPD Version:

1* Nautilus 2S tank (Pre-installed a 1.8ohm coil) / 1*Extra drip tip / 1* 0.4ohm BVC coil / 9* O rings / 1* warranty card / 1* user manual